First Biosolar Roof in Canton Valais (CH)
The first Biosolar roof in is a private villa new built on the south side of Sion. The owners were completely open to a new ecological approach of greening a flat roof in combination with solar thermal panels. Their original plan for the house had not included any green roofs. Thanks to the designers who knew about the project and were incontact with the they persuaded the owners to choose a Biosolar roof approach.
Private villa with Thermal Solar Panels on the flat roof (source: N.Baumann)
The is one of the 26 cantons of Switzerland, situated in the southwestern part of the country, around the valley of the Rhône from its headwaters to Lake Geneva, separating the Pennine Alps from the Bernese Alps. The canton is simultaneously one of the driest regions of Switzerland in its central Rhône valley and among the wettest, having large amounts of snow and rain up on the highest peaks found in Switzerland.
Designing the Biosolar roof –selecting Substrates
The first challenge was to locate a good local substrate –because of the extreme climate in the region. At the final mixture consisted of sub soil (soil excavated from the site). This subsoil also consists of small pieces of slate like rock. To this was added a mixture of gravel/crushed bricks.
Mixing the substrates: excavation soil, crushed bricks and gravels on site (source: N. Baumann)
Designing the Biosolar roof –creating glacial floodplain habitats
The design of the green roof consists of dry gravel river bed channels spread over the surface. This lead to the water outlets allowing free movement of water across the roof. This principle is based on an . Between these drainage channels the substrate mix was laid at varying depths between 100 - 250cm. This type of topography replicates the habitat characteristics of glacial floodplains, which sits within. The plant associations will be chosen according to the substrate types, heights and exposures.
Mixed substrates within the river channel bed - (source: N.Baumann)
Designing the Biosolar roof –selecting the plants and planting techniques
The plants will be planted in September, when the temperature is lower and rain is more likely. Different vegetation techniques will be used:
- native seeds
- some native plugs plant species will used (especially perennials)
- a local hay cut
a Swiss green roof technique hay mulch technique („fleur de foin") will be spread in some areas.
The hay mulch technique is a Swiss innovation known as „fleur de foin". In this instance the hay will be collected from subalpine drought-tolerant meadows, where the plants are likely to be conditioned to the stresses that will be found on the green roof. This type of meadow is very special and rare in the Valais region.
Front of the thermal solar panel with substrate depth of max. 100mm for covering plant species, not high growing species (source: N.Baumann)
Over the coming years the vegetation will be surveyed to monitor how the planting techniques work and to come up with guidance on green roofs for this very dry area of Switzerland.